By Alex James

Why Is My Orbi Blinking White Light

Are you seeing white light on your Netgear Orbi? If yes, then let us tell you that there is nothing to get worried. Orbi blinking white light means that your device (the Orbi) is booting up or updating the new firmware version. However, if the Orbi’s light continues to blink white, it means that something is not right and you really need to think about it to get it fixed.

Reasons: Orbi Blinking White Light Issue

There could be one or more annoying reasons responsible for the white light issue. The most common ones are highlighted below:

  • Outdated or corrupted Orbi’s firmware

  • Technical glitches

  • Poor power supply to the Orbi

  • Internet connectivity issues

  • Improper Orbi setup

Getting worried? Please don’t be! Orbi white light isn’t the issue worth stressing over. You know why? Just because we are here to help! Here, in this troubleshooting guide, we will provide you the best yet easy tactics that will take you out of Orbi blinking white light issue in a flash. Thus, without much delay, let’s get started!

Fixed: Orbi Blinking White Light Issue

Fix 1: Power Cycle Netgear Orbi

If your Netgear Orbi router is continuously blinking white, then it can be because of some technical glitches. Don’t worry! Technical glitches can be fixed by simply power cycling Netgear Orbi.

Don’t know how to power cycle Netgear Orbi? If you nod in yes, then know that we are here to help. Follow the instructions highlighted below and know how to power cycle your Netgear Orbi router. Scroll down a little:

Steps to power cycle your Netgear Orbi router:

  • Power off your Netgear Orbi and disconnect it from the modem and satellite.

  • Keep your Netgear Orbi unplugged for some time.

  • Plug the Orbi back in and turn it on.

  • Reconnect your Netgear Orbi, satellite, and modem.

  • Allow your Orbi to boot up.

Now, see if your Orbi is still blinking white. Still the same? OMG! Well, if you get the same error, ensure that your Orbi is getting a proper power. Note it down, poor power supply or use of a damaged wall socket for plugging in your Orbi can be one of the major causes behind getting the white light issue.

Is the issue resolved? If not, then without delay, move to the next troubleshooting tactic.

Fix 2: Update Orbi’s Firmware

Orbi blinking white light issue persists if the firmware file downloaded on it is corrupted. Thus, to get the white light issue fixed and to make the most out of your Orbi device, it is suggested to update the firmware on it to the latest version manually using Netgear Orbi login details.

To get Orbi firmware update success, do not close your Orbi or go online. If you do so, you will interrupt the Orbi firmware update process and that is not a good thing.

Fix 3: Reset Your Netgear Orbi

If power cycle or manually updating the Netgear Orbi’s firmware didn’t resolve the Orbi blinking white light issue for you, try resetting it back to factory default settings. The factory reset process will clear all the data and you need to set up your device again using

Here’s how to perform Netgear Orbi factory reset process:

  • Keep your Netgear Orbi router on. But, do disconnect your Orbi device from modem and satellite.

  • Then, using a sharp object, press and hold the Orbi’s reset hole for a couple of seconds.

  • Unhold the Netgear Orbi’s factory reset hole and give your device a couple of minutes to boot up properly.

  • Sync or Netgear Orbi and satellite. The LED on the Orbi will start blinking blue. As soon as it gets stable, it means that your devices are successfully syncing.

  • Reconnect your Orbi device and modem using an Ethernet cable.

  • Now, reconfigure your Netgear Orbi either using the manual or the WPS method.

That’s it! Netgear Orbi factory reset has been performed and completed successfully.

To Conclude

So, these were the best yet effective ways to troubleshoot Orbi blinking white light issue. We hope that the fixes we have mentioned here were helpful. If yes, then prior to closing this article, you must thank Google for putting you on the right post. Just in case, you get the same issue again, just try updating the firmware of your Orbi or upgrade your internet connection. Well, slow or poor internet can also force you experience the issue. Regarding this, your service provider can help!

Leave a Comment